800-232-7077 Premier Alloy Steel and Carbon Bar Steel Suppliers

Chemical Ranges – Alloy “H” Steel

Chemical Composition, percent
AISI or SAE
Steel No
C Mn Si NI CR Mo
1330H .27-.33 1.45-2.05 .15-.35
1335H .32-.38 1.45-2.05 .15- 35
1340H .37-.44 1.45-2.05 .15-.35
1345H .42-.49 1.45-2.05 .15-.35
4027H .24-.30 .60-1.00 .15-.35 .20-.30
4028H* .24-.30 .60-1.00 .15-.35 .20-.30
4032H .29-.35 .60-1.00 .15-.35 .20-.30
4037H .39-.41 .60-1.00 .15-.35 .20-.30
4042H .39-.46 .60-1.00 .15-.35 .20-.30
4047H .44-.51 .60-1.00 .15-.35 .20-.30
4118H .17-.23 .60-1.00 .15-.35 .30-.70 .08-.15
4130H .27-.33 .30-.70 .15-.35 .75-1.20 .15-.25
4135H .32-.38 .60-1.00 .15-.35 .75-1.20 .15-.25
4137H .34-.41 .60-1.00 .15-.35 .75-1.20 .15-.25
4140H .37-.44 .65-1.10 .15-.35 .75-1.20 .15-.25
4142H .39-.46 .65-1.10 .15-.35 .75-1.20 .15-.25
4145H .42-.49 .65-1.10 .15-.35 .75-1.20 .15-.25
4147H .44-.51 .65-1.10 .15-.35 .75-1.20 .15-.25
4150H .47-.54 .65-1.10 .15-.35 .75-1.20 .15-.25
4161H .55-.65 .65-1.10 .15-.35 .65-.95 .25-.35
4320H .17-.23 .40-.70 .15-.35 1.55-2.00 .35-.65 .20-.30
4340H .37-.44 .55-.90 .15-.35 1.55-2.00 .65-.95 .20-.30
4340H** .37-.44 .60-.95 .15-.35 1.55-2.00 .65-.95 .20-.30
4419H .17-.23 .35-.75 .15-.35 .45-.60
4620H .17-.23 .35-.75 .15-.35 1.55-2.00 .20-.30
4621H .17-.23 .60-1.00 .15-.35 1.55-2.00 .20-.30
4626H .23-.29 .40-.70 .15-.35 .65-1.05 .15-.25
4718H .15-.21 .60-.95 .15-.35 .85-1.25 .30-.60 .30-.40
4720H .17-.23 .45-.75 .15-.35 .85-1.25 .30-.60 .15-.25
4815H .12-.18 .30-.70 .15-.35 3.20-3.80 .20-.30
4817H .14-.20 .30-.70 .15-.35 3.20-3.80 .20-.30
4820H .17-.23 .40-.80 .15-.35 3.20-3.80 .20-.30
50B40H .37-.44 .65-1.10 .15-.35 .30-.70
50B44H .42-.49 .65-1.10 .15-.35 .30-.70
5046H .43-.50 .65-1.10 .15-.35 .13-.43
50B46H .43-.50 .65-1.10 .15-.35 .13-.43
50B50H .47-.54 .65-1.10 .15-.35 .30-.70
50B60H .55-.65 .65-1.10 .15-.35 .30-.70
5120H .17-.23 .60-1.00 .15-.35 .60-1.00
5130H .27-.33 .60-1.10 .15-.35 .75-1.20
5132H .29-.35 .50-.90 .15-.35 .65-1.10
5135H .32-.38 .50-.90 .15-.35 .70-1.15
5140H .37-.44 .60-1.00 .15-.35 .60-1.00
5145H .42-.49 .60-1.00 .15-.35 .60-1.00
5147H .42-.52 .60-1.05 .15-.35 .80-1.25
5150H .47-.54 .60-1.00 .15-.35 .60-1.00
5155H .50-.60 .60-1.00 .15-.35 .60-1.00
5160H .55-.65 .65-1.10 .15-.35 .60-1.00
51B60H .55-.65 .65-1.10 .15-.35 .60-1.00 .10-.15V
6118H .15-.21 .40-.80 .15-.35 .40-.80 .15Min.V
6150H .47-.54 .60-1.00 .15-.35 .15-.45 .75-1.20 .08-.15
81B45H .42-.49 .70-1.05 .15-.35 .30-.60

* Sulfur = .035- 0.50%
** Sulfur = .025 max.

Chemical Composition, percent
AISI or SAE
Steel No
C Mn Si NI CR Mo
8617H .14-.20 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8620H .17-.23 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8622H .19-.25 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8625H .22-.28 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8627H .24-.30 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8630H .27-.33 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
86B30H .27-.33 .60-.95 .15-.35 .35-.75 .35-.65 .15-.25
8637H .34-.41 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8640H .37-.44 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8642H .39-.46 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8645H .42-.49 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
86B45H .42-.49 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8650H .47-.54 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8655H .50-.60 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8660H .55-.65 .70-1.05 .15-.35 .35-.75 .35-.65 .15-.25
8720H .17-.23 .60-.95 .15-.35 .35-.75 .35-.65 .20-.30
8740H .37-.44 .70-1.05 .15-.35 .35-.75 .35-.65 .20-.30
8822H .19-.25 .70-1.05 .15-.35 .35-.75 .35-.65 .30-.40
9260H .55-.65 .65-1.10 1.70-2.20
9310H .07-.13 .40-.70 .15-.35 2.95-3.55 1.00-1.45 .08-.15
94B15H .12-.18 .70-1.05 .15-.35 .25-.65 .25-.55 .08-.15
94B17H .14-.20 .70-1.05 .15-.35 .25-.65 .25-.55 .08-.15
94B30H .27-.33 .70-1.05 .15-.35 .25-.65 .25-.55 .08-.15

NOTE 1. The Phosphorus .035 max. and the sulfur = .040 max. unless indicated otherwise.

Maximum percent

P S
Basic electric .025 .025
Basic open hearth or
basic oxygen or TOC
.035 .040
Acid electric .050 .050
Acid open hearth .050 .050

NOTE 2. Minimum silicon limit for acid open hearth or acid electric furnace alloy steel is 15 per cent.

NOTE 3. Small quantities of certain elements are present in alloy steels which are not specified or required. These elements are considered as incidental and may be present to the following maximum amounts: Copper, .35 per cent; Nickel, .25 per cent; Chromium, .20 per cent; and Molybdenum, .06 per cent.

NOTE 4. The chemical ranges and limits shown this Table and In the notes below this Table are subject to the product analysis tolerances shown In the AISI Manual. (Dated March, 1986).

NOTE 5. Standard H-Steels can be produced with a lead range of .15/.35 per cent. Such steels are identified by inserting the fetter “L” between the second and third numerals of the AISI number, e.g., 41 L 40 H. Lead is reported only as a range of .15/.35 per cent.

NOTE 6. Where minimum and maximum sulfur content is shown It is indicative of resulfurized steel.